The influences of pulsed-laser-ablation and electro-discharge-grinding processes on the cutting performances of polycrystalline diamond micro-drills.

CIRP Annals, vol. 65, 2016, pp. 105-108

Effects of novel rotary-abrasive finishing pad textures on the controlled 2-body abrasive wear of Type 304 stainless steel.

Wear, vols. 348-349, 2016, pp. 89-97

An assessment of the wear characteristics of micro-cutting arrays produced from polycrystalline diamond and cubic boron nitride composites.

Journal of Manufacturing Science and Engineering, vol. 138, 2015

A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills.

International Journal of Machine Tools and Manufacture, vol. 88, 2014, pp. 175-183

Mechanisms of surface response to overlapped abrasive grits of controlled shapes and positions: An analysis of ductile and brittle materials.

CIRP Annals - Manufacturing Technology, vol. 63, 2014, pp. 321-324

FIB/TEM/EELS micro/nanometric investigations of the effects of laser ablation on the diamond/binder structure in polycrystalline diamond composites.

Journal of Materials Processing Technology, vol. 214, 2014, pp. 1153-1161

On the topographical/chemical analysis of polycrystalline diamond pulsed laser ablated surfaces.

Procedia CIRP, vol. 13, 2014, pp. 387-392

A time based method for predicting the workpiece surface micro-topography under pulsed laser ablation.

Journal of Materials Processing Technology, vol. 214, 2014, pp. 3077–3088

Micro / nanometric investigations of the effects of laser ablation in the generation of micro-tools from solid CVD diamond structures.

Journal of Materials Processing Technology, vol. 213, 2013. pp. 194–200

On the influence of single grit micro-geometry on grinding behavior of ductile and brittle materials.

International Journal of Machine Tools and Manufacture, vol. 74, 2013, pp. 12–18

Solid diamond micro-grinding tools: from innovative design and fabrication to preliminary performance evaluation in Ti-6Al-4V.

International Journal of Machine Tools and Manufacture, vol. 59, 2012, pp. 55–64

Ordered diamond micro-arrays for ultra-precision grinding—An evaluation in Ti–6Al–4V.

International Journal of Machine Tools & Manufacture, vol. 51, 2011, pp. 54–66

A preliminary study of the effects of crystal orientation of CVD monocrystalline diamond in micro-milling of Ti-6Al-4V.

Proceedings of the Institute of Mechanical Engineers, B; Journal of Engineering Manufacture, vol. 224, 2010, pp. 1305 –1312

Preferentially oriented diamond micro-arrays: A laser patterning technique and preliminary evaluation of their cutting forces and wear characteristics.

International Journal of Machine Tools & Manufacture, vol. 49, 2009, pp. 1175–1184

Abrasive waterjet cutting of polycrystalline diamond: A preliminary investigation.

International Journal of Machine Tools & Manufacture, vol. 49, 2009, pp. 797–803

A single bead test for assessing diamond wire performance.

Industrial Diamond Review, vol. 2, 1999, pp. 93–101

A Study of diamond wire bead rotation.

Industrial Diamond Review, vol. 53, 1993, pp. 79-81

The economics of rapid grinding of PCD and PCBN cutting tools.

Industrial Diamond Review, vol. 1, 2003, pp. 20-23

Hochharte Schneid- und Schleifstoffe in der Automobilindustrie.

Industrie Diamanten Rundschau, vol. 35, 2001, pp. 334-345

Untersuchungen zur Bestimmung des Einsatzverhaltens von Seilsägen.

Industrie Diamanten Rundschau, vol. 33, 1999, pp. 124-134

Rate of shear of an Ultrasonic Oscillating Rod Viscosity Probe.

Ultrasonics, vol. 65, 2016, pp. 18-22

Dynamic Ultrasonic Contact Detection using Acoustic Emissions.

Ultrasonics, vol. 53, 2014, pp. 749-753

A Low-Cost Viscometer Based on a Permanent Magnet DC Motor.

Measurement Science and Technology, vol. 24, 2013, 035304

An Approach for Using Iterative Learning for Controlling the Jet Penetration Depth in Abrasive Waterjet Milling.

Journal of Manufacturing Processes, vol. 22, 2016, pp. 99-107

Development of a Slender Continuum Robotic System for On-wing Inspection/Repair of Gas Turbine Engines.

Robotics and Computer Int. Manuf., vol. 44, 2016, pp. 218-229

Design and Implementation of an Electronic Front-End Based on Square Wave Excitation for Ultrasonic Torsional Guided Wave Viscosity Sensor.

Sensors, vol. 16, 2016, pp. 1681

Acoustic Emission Energy Transfer Rate: A Method for Monitoring Abrasive Waterjet Milling.

International Journal of Machine Tools and Manufacture, vol. 58, 2012, pp. 80-89

The Torsional Waveguide Viscosity Probe: Design and Anomalous Behaviour.

IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol. 58, 2011, no. 8, pp. 1628-1640